I had to share a new video from Mitsubishi showing how dramatic their F-Cut mode is for their 4kW lasers is. As the article states the NX-F is impressive in its own right, but with the F-Cut mode enabled the cycle time is reduced by %40. I do notice that the cut strategy is slightly different, so I’m not sure if that is contributing to the reduced time. I would have also liked to see the specification on the material it’s cutting. Check it out and see for yourself.
Link to NX-F Series Information : http://www.mcmachinery.com/products-and-solutions/nx-f-series/
Link to Blog Post : http://www.mcmachinery.com/blog/(Video)_F-Cut_Feature_Makes_Fiber_Laser_Even_Faster/