Looking to buy a sheet-metal roller

Viewing 1 post (of 1 total)
  • Bill Stiger
    Post count: 0
    #13800 |

    Guy’s we are in need of an new or used 8′ roller with 2″ rollers. We are needing this to roll .020 aluminum. we tried on a roller with 6-inch rollers but had no luck, need the smaller rollers.

    I have been scouring the web looking and have had no luck, hoping this group can guide me in a direction. thanks!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.