BENDING A COMPONENT AFTER RECTANGULAR DRAW

Viewing 1 post (of 1 total)
  • UTTAM JADHAV
    Member
    Post count: 0
    #13740 |

    I PLANNED A COMBINATION DRAW FOR RECTANGULAR DRAWING OPERATION OF 30mm(CRCA D GRADE) HEIGHT & ITS HAS GOT LARGER EMBOSSING OPERATIONS & PIERCING ON TOP OF THE COMPONENT.THE PROBLEM IS IT HAS ONE FREE END THAT EXTENT UP TO 50mm HEIGHT AFTER BENDING OPERATION.NOW AT PRESENT IT IS EXACTLY AT 90 DEGREE TO THE SIDE WALLS OF DRAW COMPONENT.WHILE START BENDING OPERATION ITS GETTING SPRING BACK EVEN AFTER THROUGH PUNCH TRAVEL.
    IT HAS GOT STRONG RADIUS ON CORNER.
    HOW TO BEND?

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.