Aluminum sheet thickness question

Viewing 2 posts - 1 through 2 (of 2 total)
  • Scott Matheson
    Post count: 0
    #14110 |

    Greetings all,
    I have inherited a design from a European company that I need to make some design changes to.
    The material specified is 1.2mm thick 1050 aluminum, the thickness does not seem to translate to any standard gauge thickness; it seems to be somewhere between 16 & 17 gauge.
    Is this a standard thickness in Europe?

    Rasmus Juhlsen
    Post count: 1
    #14118 |

    This is a pretty standard thickness in Europe yes

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.